How to choose AC dimmer module?
The main parameter is current power (Ampere/Watt). We recommend that the device load power value be no over than 70% of the dimmer value. Example: Dimmer 8A (230V*8A=1.8kWt), load = 8A*70%=5.6A (230V*5.6A=1.3kWt).
What VCC of AC dimmer module?
VCC needs the same logic level as the MCU. For ATmega = 5V, ESP32/8266 = 3.3V, STM32 = 3.3V
Dimmer with ESP32 – Blynk IoT Platform. Arduino code, settings, Web and mobile APP.
Blynk IoT is a full suite of software required to prototype, deploy, and remotely manage connected electronic devices at any scale: from personal IoT projects to millions of commercially connected products. With Blynk anyone can connect their hardware to the cloud and build a no-code iOS, Android, and web applications…
Dimmer with ESP32 – ESP RainMaker Cloud platform + Mobile APP.
ESP RainMaker® is a complete system for building AIoT products with a minimal amount of code, empowering your team to develop and deploy secure, customized AIoT solutions. It covers all Espressif chips and modules, device firmware, voice-assistant integrations, phone apps and cloud backend. This helps you save a large investment in…
Dimmer with ESP8266/ESP32 MQTT – Publish and Subscribe with Arduino IDE. Connecting to Home Assistant, Node-RED, Amazon AWS, and openHAB
This project shows how to use MQTT communication protocol with the ESP32 to publish messages and subscribe to topics from MQTT broker under servers like Home Assistant, Node RED, Amazon AWS, and openHAB. As an example, we’ll control the dimmer. The server can be either local or on the cloud.…
Dimmer controller – ESP32/8266 web server with slider Arduino code.
1ch dimmer Arduino Code 4ch dimmer Arduino Code Setting Wi-Fi access Web server slider and dimming In this Dimmer control with the web-server project, we will learn how to build with ESP8266 and ESP32 the slider web-server that will control the dimming voltage level of the dimmer connected to the…